Yes. Our engineers and in-house crews work throughout Dubai from our base in Al Quoz, Dubai — with the same 360° inspection and LuxGuard™ systems on every project.

What does waterproofing cost in Dubai?

It depends on the area, the condition of the substrate, access and the system specified — which is why we inspect first. After the assessment you receive a fixed, itemised proposal with no surprises.

What are the most common problems you find in Dubai?

Most often roofs & exposed details, connected interfaces and occupied buildings. Assess roof coverings, outlets, parapets and penetrations alongside the leak history. Check how facades, windows, terraces and roof-to-wall junctions connect. Coordinate access, work zones and handover with owners, tenants and facilities teams.

Waterproofing in Dubai — Roofs, Villas & Pools

Waterproofing in Dubai

Halo Shield is based in Al Quoz and serves properties across Dubai. Roof leaks, facade joints, podium decks, pools and damp interiors need a scope matched to the building and its use. Share the location, affected areas and available drawings so we can discuss the assessment and access requirements.

Free inspection Ask an engineer

Villas, residential towers, offices, hotels and industrial properties

Case studies in Dubai

Browse projects by location

Applicator working across a floor beside protective sheeting in a Dubai property
Interior floor
Indoor Floor Surface Application in Dubai
A furnished interior in Dubai was set up for floor application beside glazed doors. Protective sheeting was placed over adjacent surfaces, leaving an open working area for the applicator and hose. The photograph shows the floor while the application was underway.
- Protective sheeting around the work area.
- An open route for the applicator and hose.
- Floor application beside glazed doors.
Read the full case study
Location
Dubai
Surface
Interior floor
Stage shown
Application in progress
Wide view of the light-coloured flat roof in Dubai South
Roof and mechanical services
Flat Roof Protection in Dubai South
This Dubai South roof has open deck areas around clusters of air-conditioning units and fixed pipework. The photographs show the light-coloured surface continuing around raised equipment bases and along the perimeter, with a close view of the pipes and their supports.
- Wide roof views showing the open deck and its boundaries.
- Air-conditioning units and raised bases within the roof area.
- Close view of pipework and supports over the deck.
Read the full case study
Location
Dubai South
Surface
Flat deck with fixed equipment
Stage shown
Roof and equipment details
Crew applying treatment beneath a low tiled roof in Jumeirah Park
Villa attic and ceiling
Attic & Ceiling Treatment in Jumeirah Park
At this Jumeirah Park villa, the work took place beneath the tiled roof and above an exposed ceiling grid. One set of photographs follows spray application inside the shallow attic. A second set shows the crew working from below, around the open framing and building services.
- Application within the low space below the roof tiles.
- Access between timber trusses in the attic.
- Work above the open ceiling grid and exposed services.
Read the full case study
Location
Jumeirah Park
Surface
Attic and ceiling void
Stage shown
Application in progress
Halo Shield crew coating the flat roof section of a Jumeirah Park villa
Villa roof
Villa Roof Waterproofing in Jumeirah Park
Halo Shield coated a narrow flat roof section at a Jumeirah Park villa, where it meets pitched roof tiles and low upstands. The sequence starts with the existing surface and rooftop equipment, then follows spray application across the deck and beside the tile junction.
- Existing flat section documented between pitched roof areas.
- Spray application across the deck.
- Close view at the edge of the tiles and beside an upstand.
Read the full case study
Location
Jumeirah Park
Surface
Flat deck beside pitched tiles
Stage shown
Existing surface and application
Wide view along the ribbed metal roof at Mar Thoma Church in Jebel Ali
Church metal roof
Mar Thoma Church Metal Roof Works
The roof work at Mar Thoma Church in Jebel Ali involved moving ribbed metal panels onto a broad roof span. Site photos show the crane lift, the crew positioning panels and the meeting edges between them. A wide view records the roof profile on both sides of the ridge.
- Crane lift to bring ribbed panels to roof level.
- Crew positioning panels across the roof.
- Close views of panel edges and the roof ridgeline.
Read the full case study
Location
Jebel Ali
Surface
Ribbed metal roof panels
Stage shown
Lifting and placement
Bathtub and tiled surround with an inspection opening
Bathroom and pipework
Bathtub & Pipework Inspection in Dubai
A tiled surround enclosed the underside of this bathtub in Dubai. The technician worked through an access opening beside the bath, where concealed pipework and fittings came into view. The photographs show the position of the opening and what could be reached through it.
- Inspection through the access opening beside the bath.
- Close views of concealed pipework and fittings.
- Wider view of the space behind the tiled surround.
Read the full case study
Location
Dubai
Surface
Bathtub surround and pipework
Stage shown
Inspection
Halo Shield crew spray-coating a flat villa roof in Nad Al Sheba
Villa roof and inspection
Villa Roof Waterproofing in Nad Al Sheba
Halo Shield’s Nad Al Sheba project records a villa walkthrough followed by spray application on the flat roof. The walkthrough documented the exterior, roof perimeter and selected interior surfaces. During roof work the crew protected the surrounding walls and applied coating across the deck and into the corners.
- Roof and interior walkthrough before the application photographs.
- Protective sheeting along the roof perimeter.
- Spray application on the open deck, at corners and at the parapet base.
Read the full case study
Location
Nad Al Sheba
Surface
Flat villa roof and parapets
Stage shown
Inspection and application
Exterior of the villa in Jumeirah Islands
Pitched and flat villa roof
Villa Roof Preparation in Jumeirah Islands
At this Jumeirah Islands villa, a small flat roof section sits below the surrounding pitched tiles. The exterior photograph gives the full roof form and the higher views show the crew inside the recess. The documented work focuses on the existing roof layout and on-site preparation.
- Exterior survey showing the pitched roof.
- Recessed flat section documented from above.
- Crew working beside the pitched tiles within the recess.
Read the full case study
Location
Jumeirah Islands
Surface
Recessed flat deck and pitched tiles
Stage shown
Preparation in progress